Ultrasonic cleaner standard – what is the ultrasonic cleaner standard

With the development of industrial science and technology, ultrasonic cleaners have been widely used in surface spraying treatment industry, machinery industry, electronics industry, medical industry, semiconductor industry, watches and jewelry industry, etc. However, we often do not know what the standards of ultrasonic cleaners are, so we will introduce some standards of ultrasonic cleaners.

Standards for ultrasonic cleaners – two ways of daily maintenance

Cleaning machine technical characteristics

Power supply: use the power supply and power cord that meet the equipment specifications. The user’s power circuit must be equipped with an air switch dedicated to the cleaning machine to cut off the power supply of the cleaning machine when needed; The electrical control box and relevant electrical components shall not be splashed with water, and shall be kept away from steam, corrosive gas, dust, etc;

Grounding wire: the body and generator of the cleaning machine produced by our company will be equipped with special grounding wire on their power leads, and have the characteristics that distinguish them from other wires. Because this equipment is easy to cause leakage due to its contact with water and corrosive (swelling) liquid level, please connect the grounding wire according to the safety requirements; Non combustible detergent shall be used for the equipment, and flammable and explosive substances shall not be used as detergent. When using the equipment, it is necessary to ensure that it is far away from the places with flammable and explosive substances. When users must use certain substances under special circumstances, they must consult the company to confirm safety and take corresponding safety protection measures; No liquid or insufficient liquid level in the cleaning tank will cause irreversible damage to the equipment. When using, it is necessary to ensure that sufficient cleaning liquid is injected into the tank, otherwise the related electric heater, pump and ultrasonic vibrator may be damaged and may cause fire and personal injury.

Ultrasonic Cleaner

Standards for ultrasonic cleaning machine – the following conditions shall be noted for the above two types

If the equipment is abnormal, please contact our company in time or check it by an experienced professional electrician after stopping the power supply; The workpieces to be cleaned shall be installed and hung with a washing basket or hanger with legs, and put into the tank for cleaning. It is prohibited to put the workpieces directly into the tank bottom for cleaning, otherwise the workpieces and the tank bottom may be damaged; During equipment operation, there may be high temperature, high voltage, electrification on the terminal surface of electrical components, movement of transmission mechanism, sudden pressure and other factors that may cause personal injury in the machine body. Please do not open the machine casing during operation to avoid working under unprotected conditions; When the equipment is not used for a long time, please discharge the cleaning solution, dry the inner tank and surface and protect them with film to prevent the corrosion and aging of the equipment from accelerating; Keep the equipment workplace ventilated, dry and clean, which is conducive to long-term efficient operation of equipment and optimization of working environment conditions; If the cleaning solution is too dirty, it should be handled in a timely manner. The dirt in the cleaning tank and the liquid storage tank should be cleaned regularly to keep the inside and outside of the cleaning tank clean, which can improve the durability of the cleaning tank;

cleaning basket

The above is the relevant information about the ultrasonic cleaner standards introduced to you. We know that whether the ultrasonic cleaner is installed or used, there should be certain standards to measure whether our installation and use are standardized. We must only use these standards before using the ultrasonic cleaner. The ultrasonic cleaner standards will enable us to better use this product.

If you are interested in ultrasonic cleaning machine, please contact our company!