Auto parts ultrasonic washing machine routine maintenance precautions
Browse Volume:670 Classify:Support
The car parts ultrasonic washing machine is now used in many fields, but it mainly cleans the car parts. His unique cleaning method and cleaning ability are highly praised in the industry. Then the topic comes back again. Even the best machines are easy to break if they don’t know how to maintain them. Their life will be shortened and their costs will be increased relatively. The following is a summary of what should be paid attention to in the daily use of some car parts ultrasonic washers.
![Cleaning of oil stains](https://www.granbosonic.com/wp-content/uploads/2022/09/清洗油污2-3.jpg)
Cleaning of oil stains
1. Power supply: use the power supply and power cord that meet the equipment specifications. The user’s power circuit must be equipped with an air switch dedicated to the cleaning machine to cut off the power supply of the cleaning machine when needed;
2. Grounding wire: the body and generator of the car parts washer will be equipped with a special grounding wire on its power lead, which is clearly distinguished from other wires. Because this equipment is easy to cause leakage due to its contact with water and corrosive (swelling) liquid level, please connect the grounding wire according to the safety requirements;
![Oil stain problem](https://www.granbosonic.com/wp-content/uploads/2022/09/油污难题2.jpg)
Oil stain problem
3. Non combustible detergent shall be used for car parts washing machine. Flammable and explosive substances shall not be used as detergent. When using the equipment, it is necessary to ensure that it is far away from the places with flammable and explosive substances. When users must use certain substances under special circumstances, they must consult to confirm safety and take corresponding safety protection measures;
4. No liquid or insufficient liquid level in the cleaning tank will cause irreversible damage to the equipment. When using, it is necessary to ensure that sufficient cleaning liquid is injected into the tank, otherwise the related electric heater, pump and ultrasonic vibrator may be damaged and may cause fire and personal injury;
5. The electrical control box and relevant electrical components shall not be splashed with water, and shall be kept away from steam, corrosive gas, dust, etc;
6. The workpieces to be cleaned shall be installed and hung with a washing basket or hanger with legs, and put into the tank for cleaning. It is prohibited to put the workpieces directly into the tank bottom for cleaning, otherwise the workpieces and the tank bottom may be damaged;
![Ultrasonic cleaning machine oil removal](https://www.granbosonic.com/wp-content/uploads/2022/09/超声波清洗机除油.jpg)
Ultrasonic cleaning machine oil removal
7. During the operation of the car parts washing machine, there may be high temperature, high voltage, live electrical component terminal surface, movement of the transmission mechanism, sudden pressure and other factors that may cause personal injury in the body. Do not open the housing during the operation to avoid operating under unprotected conditions;
8. When the car parts cleaner is not used for a long time, please drain the cleaning solution, dry the inner groove and surface, and protect them with film to prevent accelerated corrosion and aging of the equipment;
9. If the cleaning solution is too dirty, it should be handled in a timely manner. The dirt in the cleaning tank and the liquid storage tank should be cleaned regularly to keep the inside and outside of the cleaning tank clean, which can improve the durability of the cleaning tank;
If you are interested in ultrasonic cleaning machine, please contact our company!
Hello!